Power Supply Concept - WAGO 750-606/040-000 Manual

WAGO I/O SYSTEM 750 XTR
750-606/040-000 Power Supply 24 VDC XTR for Ex i XTR Modules
6.2

Power Supply Concept

Keep the air and creep distances between intrinsically safe segments!
The maximum current available from the 750-606/040-000 "Power Supply
24 VDC Diagn for Ex i XTR Modules" is 1 A.
If the use of further 750-606/040-000 is necessary for reasons of extent of
utilization, 4 Separation Modules (750-616/040-000) must be used to guarantee
the distance between the intrinsically safe segments.
Do not exceed maximum current via power contacts!
The maximum current available from the "Power Supply 24 VDC Diagn for Ex i
XTR Modules" 750-606/040-000 is 1 A. Greater currents can damage the power
contacts. When configuring the system, ensure that this current is not exceeded.
If exceeded, an additional 750-606/040-000 must be used.
Further information about explosion prevention!
Further information about explosion prevention can be found in section "Use in
Hazardous Environments"!
The power supply module 750-606/040-000 (Power Supply 24 VDC XTR for Ex i
XTR Modules) is powered via the CAGE CLAMP
module. The power jumper contacts designed as spring contacts provides a safe
voltage of 24 VDC to the following I/O modules.
Connect Devices
®
connection from an XTR filter
Version 2.0.0
41
Manual