Kaba ILCO FDU User Manual page 82

Purpose:
Shortcut:
Default:
Options:
Purpose:
Shortcut:
Default:
Options:
Front Desk Units - Using and Programming
3.6.18. Accept PIN
Enables the FDU to allow the use of PINs as a replacement for certain levels of
keycards.
Swipe a GMA keycard, press 7, 2, 3 and 4
Disabled
YES: Enabled
NO: Disabled
When "Accept PIN" is set to YES as shown above the FDU will allow the use of PINs
as a replacement for certain authorization levels.
By default "Accept PIN" is set to NO and the FDU will not allow the use of PINs to
access the system. In this configuration an authorization keycard is always required to
access the FDU.
Use the left < > or right < > arrow to toggle between YES and NO. Press < > to
save the setting.
3.6.19. Create PIN
Enables the FDU to allow the creation of PINs for certain authorization level keycards.
Swipe a GMA keycard, press 7, 2, 3 and 4
Disabled
YES: Enabled
NO: Disabled
Kaba Ilco Lodging Access Control System
71