Kaba ILCO FDU User Manual page 208

Auditing
Specify the Authorization number. All entries by keycards encoded using the
specified Authorization will be displayed.
6. Use the down < > arrow to select the "From audit #" option.
Enter the starting entry in the audit. The default value is 1, which is the newest
one.
7. Use the down < > arrow to select the "Audit quantity" option.
8. Enter the maximum number of entries in the audit that are to be shown up to a
maimum of 4000 (if that many are available in memory). Only the most recent
entry will be displayed, up to the specified number of entries. If an audit appears
more than once, then the last entry is the most recent.
Depending on the media that will receive the result of the audit, the following steps
differ. The 3 following sections describes the particularity of the audit sent to the
FDU screen, to a line printer or to a USB memory stick.
FDU Audit sent to the FDU screen
Press < > to start the audit report. When viewing the audit on the FDU screen,
use the < > and < > keys to scroll through the list of entries.
Kaba Ilco Lodging Access Control System
197