Kaba ILCO FDU User Manual page 103

92
Chapter 4
Description:
4.6.2.3 Fixed Time Zones
These time zones are available in all locks programmed as Guest or Staff Common Area
locks, where flexible time zones apply. Some RAC 3.5 card readers equipped with
There are 8 Guest Common Areas available in the FDU,
which may also be required for the staff to access. These are
low security zones such as a pool or parking, and should be
encoded on the keycard only if applicable to the specific staff.
Each sub-master level keycard may have access to any guest
common area, depending on the administrator decision. Refer
to Section 3.6 part 5 – Staff Access to Guest Common Areas
for configuration details.
For example, the FDU is set to grant staff access to guest common areas.
Guest Common Areas #1, and #2 are set to AUTO, and Guest
Common Areas #3 and #4 are set to YES. When encoding applicable
staff keycards the user selects whether or not to grant access to the available
Guest Common Areas.
Press the right < > arrow to choose the Guest Common Area(s) to encode
on the staff keycard:
Use the up < > or down < > arrows to select each Guest Common
Area available. By default the value is set to NO. Press the left < > or
right < > arrow to set the value to YES if the particular Guest Common
Area is to be encoded on the staff keycard. Note that the applicable staff
card being encoded will automatically get access to Guest Common Areas
#1 and #2 (as they are set to AUTO).
When encoding a Bellman Master keycard, all guest common areas set to
AUTO will still appear in the list, defaulted to NO, so they will have to be
entered manually staff access is desired.
Kaba Ilco Lodging Access Control System