Kaba ILCO FDU User Manual page 148

Locks – Using and Programming
4. Press 1 or < > to reach the "Lock Programming" menu.
5. Press 1 or < > to reach the "Program Addresses" menu.
6. The FDU displays a list of the current addresses in memory for programming
guest room locks. Consult the Planning Form to determine the desired addresses
for the lock.
Enter a room number. Scroll through the list using the < > and < > keys to
view the Guest, Section, Floor, Group, Zone and Area addresses. To move to a
different line, use the up < > or down < > arrow. Press < > when ready to
program the lock.
7. Insert the Programming keycard in the lock, after which the green indicator light
should be lit. Connect the communication cable from the FDU to the lock and
press any key on the FDU to send the programming to the lock. After the
configuration is transferred to the lock, the following message is displayed:
Kaba Ilco Lodging Access Control System
137