For a typical installation, no professional electrician is required because the RAC 660G is a low voltage installation system. Important: Carefully inspect windows, doorframe, door, Kaba Lodging Systems is not responsible for damage or etc. to ensure that the recommended procedures will not malfunction due to incorrect installation.
Product Description (Continued) Feature List 2.1: Feature RAC 660G Variable access delay Standard Power failure 3-day auto-recovery; real time clock (RTC) Standard Infrared (IR) programming & auditing Standard Relay bypassing (passage function) Standard Keypad reader Standard Unlock delay programmable by Dip Switches Standard Fire Alarm Input Standard...
2.2.3 Locking devices 2.2.4 Other optional components The RAC 660G provides one relay output that can be used to The RAC 660G is a flexible Access Control Solution and can be control one of the following locking devices. Either an Electric combined with the following: Strike (H) or an Electromagnetic Lock (I) or a Garage Door •...
3.0 Checklist and Exploded Views (Continued) 3.2 Exploded View Figure 7 Hardware Bag Controller Box Keypad Ingress Power Adaptor North American 2 x 6 3 x 4 Peripherals / Optional Devices International P K3 5 1 2 _0 9 _0 7 • RE M O T E AC C E S S CO N TROL L E R - 6 60 G...
4.0 System Installation Overview (Continued) Determine the routing needed for the wiring of the RAC 660G Two types of power adaptors are available dependant of peripherals (keypads, locking mechanism, etc) and as required the countries where controller box is to be installed. select the knock-out(s) on the controller box to remove for •...
Step 6: Connect wiring NOTE: Refer to manufactures wire gauge installation selections. CAUTION: Do not exceed the maximum cable length Install the diode across the terminals of the electromagnetic indicated by the manufacturer of products being lock (I) or, using the crimp terminal B connectors (U) connected.
4.0 System Installation Overview (Continued) Mounting Keypad Reader NOTE: The strain relief bushing (R) provided in the hardware bag has a movable attached plug. When the plug is IMPORTANT: The installation bag supplied with the removed, It leaves an opening that allows a double wire kaypad reader includes screws for metal panel flat cable to be routed in.
Steps to program the RAC with PALM: For step by step programming instructions, refer to www.kaba-ecode.com on line help getting started and The maximum recommended load for all output relays in the maintenance unit. keypad reader control panel is 1 Amp at 30 VDC. The current...
6.0 Annex C Quick Troubleshooting Guide The following sections show basic troubleshooting for some • External Inputs Troubleshooting common problems that may occur during installation. Each • Locking Device Troubleshooting section relates to a specific type of problem, namely: • Relay Expansion Board Troubleshooting •...
4. Locking Device Troubleshooting Symptom Action Locking Device always unlocked - If the Locking Device Relay LED (D31) on the RAC 660G controller is ON: • Verify that the delay setting of the DIP switch (SW2) is correct. • Verify that the lock is in not Passage Mode. - If the Locking Device Relay LED (D31) on the RAC 660G controller is OFF: •...
Page 18
Kaba Lodging Systems 7301 Boul. Décarie Montréal (QC) H4P 2G7 Technical Support: 1.800.906.4526 Customer Service: T: 1.877.468.3555 F: 514.735.6589 General Information: www.kabalodging.com Online Consumable Orders: www.keycard.com To access all of our easy steps, please visit our Support Website: http://connect.kabalodging.com...