Kaba ILCO FDU User Manual page 72

Shortcut:
Default:
Options:
Notes:
Front Desk Units - Using and Programming
Swipe a GMA keycard, press 7, 2, 2, 2 and 3
Disabled: No time restrictions on staff access.
YES: Enabled
NO: Disabled
AUTO: Automatic (only for "Timezone" when "Enable Fixed Tz" is set to YES)
By default the "Enable Fixed Tz" is set to NO, indicating that the staff has access to
the specific areas encoded on their card 24 hours a day.
If the "Enable Fixed Tz" option is set to YES, specify YES, NO or AUTO for each
Timezone.
If the Time Zone is to be offered each time a keycard is made, enter YES. The user
will be prompted for each keycard being encoded as to whether or not each Timezone
set to YES is to be encoded on the keycard or not.
If the Time Zone is not to be offered, enter No (no staff will have access during that
Time Zone).
If the Time Zone is to be encoded automatically on all staff keycards, enter AUTO (all
staff will have access during that Time Zone.
Do not press < > after each entry. Press the up < > or down < > arrow keys to
select the Time Zone and the left < > or right < > arrow to choose between, YES,
No and AUTO. Press < > to save the changes or <
menu.
The locks function on internal time only, and do not know when time changes from
Standard Time to Daylight Savings Time. Fixed time zones are actually five hours
long to compensate for the time change. In Standard time, keycards will be valid
from one hour before the start of the selected time zone to the exact end time of the
time zone. In Daylight Saving time, keycards will be valid from the exact start time
until one hour following the end of the selected Time Zone (see figure 4.6.7-1).
Kaba Ilco Lodging Access Control System
> to return to the previous
61