Front Desk Units - Using and Programming
4. Select a new external Hotel Code, write it down and keep the information in a
secure location. Enter the new external Hotel Code in the FDU with the keypad,
then press the down < > arrow to enter the number of Hotel Restart keycards
required (more than one is recommended, so that there will be sufficient time to
insert one in each lock on the property).
Press < >.
5. Swipe the required amount of blank keycards through the FDU until the
requested number of cards is encoded.
NOTE: Hotel Restart keycards should only be handled by upper management or
other persons in a position of trust.
6. On the FDU used to make the Hotel Restart key-card, press <
Authorization prompt is displayed:
7. Swipe the Hotel Restart keycard through the FDU.
Kaba Ilco Lodging Access Control System
> until the
51