Kaba ILCO FDU User Manual page 39

28
Chapter 3
Refer to Appendix A – Keycard Quick Reference Chart for more details on the selectable
expiry for each type of card.
3.5.2.2 Variable Expiry:
The System offers two types of expiry times for Guest level keycards, selectable expiry
as defined above, or variable expiry. If variable expiry is enabled when a keycard is being
encoded staff can either use the default setting of the selectable expiry, or they can enter a
custom expiry value each time they encode a Guest level keycard.
The Variable Expiry feature applies to the following types of guest entry keycards only:
Guest, Adjoining Suite, Common Door Suite, Convention Suite and Pre-Registered. (To
enable Variable Expiry, see Section 3.6, part 2 – Variable Expiry.)
3.5.2.3 Setting the Expiry Values:
Purpose:
Minimum Keycard Required:
Steps to set the expiry for a keycard:
1. Swipe a keycard having a GMA or MA authorized user level.
2. Press 7 as a shortcut or use the down < > arrow to reach the "FDU Setup" menu
and press < >.
3. Press 1 or < > to reach the "Keycard Expiry" menu.
To set the selectable expiry values to be used when
encoding keycards.
Master Authorization (MA) or General Manager
Authorization (GMA), depending on which keycard
expiry is to be set. Refer to Appendix A –Keycard
Quick Reference Chart for more details.
Kaba Ilco Lodging Access Control System