Kaba ILCO FDU User Manual page 67

Default:
Options:
Purpose:
Shortcut:
Default:
Options:
56
Chapter 3
Enabled
YES: Enabled
NO: Disabled
FDU-A
By default the variable expiry is set to YES indicating that each time a guest level
keycard is encoded the user can specify a time period for the encoded keycard to be
valid.
If set to NO then every guest keycard encoded will be valid only for the default expiry
time set within the FDU. The system default is 1 night, please refer to Section 3.5.2.3 –
Setting the Expiry Values: for details on changing the default value.
Use the left < > or right < > arrow to select the value desired. Press < > to save the
setting.
3.6.3. Enable Guest Common Areas
There are eight Guest Common Areas available. Guests may be granted access to all or
only to some of these areas. Admission to the common areas can be granted
automatically when the keycard is encoded. Alternatively, each time a keycard is
made, the areas to which guests will be admitted can be selected. Each common area
can be set to offer one of these choices.
Swipe a GMA keycard, press 7, 2, 2, 1 and 2
Disabled
YES: Enabled
NO: Disabled
AUTO: Automatic (only for "Common Area" when "Enable Areas" set to YES)
FDU-B
Kaba Ilco Lodging Access Control System