Kaba ILCO FDU User Manual page 81

Purpose:
Shortcut:
Default:
Options:
70
Chapter 3
encoded, the user is prompted by the FDU as to whether this feature is to be encoded
on the keycard or not.
By default the "Disability Op." is set to NO and this feature is not encoded on any
guest keycard being encoded.
When the "Disability Op." is set to AUTO all guest keycards will be encoded with this
feature. Locks will remain open for 15 to allow more time for the user to turn the
handle and open the door.
Use the left < > or right < > arrow to toggle between YES, NO and AUTO. Press
< > to save the setting.
3.6.17. Enable POS
Enables or disables the POS verifier mode.
Swipe a GMA keycard, press 7, 2, 3 and 4
Disabled
YES: Enabled
NO: Disabled
When "Enable POS" is set to YES the FDU can create POS Verifier Mode keycards.
Additionally if the FDU is to be used for POS verification this setting must be YES.
By default the "Enable POS" is set to NO and the FDU cannot create the POS Verifier
Mode keycards, or be used for POS verification.
Use the left < > or right < > arrow to toggle between YES and NO. Press < > to
save the setting.
Kaba Ilco Lodging Access Control System