Kaba ILCO FDU User Manual page 76

Shortcut:
Default:
Options:
Purpose:
Front Desk Units - Using and Programming
keycards and can download to the locks as required. Do not adjust internal time
according to seasonal time changes.
The FDU also keeps current time. Current time is used to display expiries and audit
information in local time. This time is changeable so the FDU may be adjusted to
seasonal time changes.
An example of the use of the current time is in making pre-registered keycards. The
arrival time of the guest is specified in the current time, and the FDU automatically
encodes the correct internal time on the keycard so that the keycard becomes valid at
the time expected by the staff member using the FDU.
Swipe a GMA keycard, press 7, 2, 3 and 1
Disabled
YES: Enabled
NO: Disabled
When set to YES as shown above, 1 hour is added to the system time to account for
daylight savings time. An asterisk (*) on "Local Time" indicates daylight savings time
is active. When set an asterisk (*) will also be shown next to the time on the status line
from the main screen.
By default the DST adjustment is set to NO and the current time shown in the FDU
will be standard time.
Press the left < > or right < > arrow to toggle between daylight savings time (YES)
and standard time (NO). Press < > to save the setting.
3.6.11. Folio Number
Certain properties may use Folio Numbers for guests to make POS purchases. The
Folio Number feature must be enabled in order for a folio number to be entered and
encoded when issuing a Guest keycard.
Kaba Ilco Lodging Access Control System
65