Kaba ILCO FDU User Manual page 45

34
Chapter 3
6. Press 1, or use the down < > arrow followed by < > for "Receive Configuration"
to put the receiving FDU in receive mode.
7. On the FDU that will transmit the data, swipe a keycard with a GMA or MA
authorized user level.
8. Press 8, or use the down < > arrow followed by < > to reach the "Programming
FDU/Lock" menu.
9. Press 2, or use the down < > arrow followed by < > to reach the "Another FDU"
menu.
10. Press 2, or use the down < > arrow followed by < > for "Send Configuration" to
put the transmitting FDU into send mode.
Kaba Ilco Lodging Access Control System