Kaba ILCO FDU User Manual page 193

182
Chapter 7
Subsequent screens contain information like the battery voltage level, featres encoded on
the card, and the individual audits, numbered by most recent entry.
Audit #1 below shows the information on the programming keycard used to program the
lock information.
In order to view the lock audit, the audit data must be transferred to the FDU for display,
printing or saving. This can be accomplished by swiping a Programming keycard in the
lock, waiting for a green LED to display on the lock, connecting the FDU to the lock
using the communication cable and following the on-screen directions.
A sample print-out of a lock audit is shown below.
Audit Event
760 (LCB9) Version: 1.35
Guest Room: 100
Section: 10
Floor: 55
Group: 3
Zone: 2
Area: 7
Batteries: 4.46V
Override: YES
Common Door Override: NO
Filter: All
Description
Information on the lock itself, including
room number, addresses, battery level and
audit filter information.
Kaba Ilco Lodging Access Control System