Kaba ILCO FDU User Manual page 102

Keycards
4.6.2.2 Guest Common Areas encoding for staff keycard
Applicable Keycards:
Kaba Ilco Lodging Access Control System
Press the right < > arrow to access the available Staff Areas that can be
encoded on the keycard. The available Staff Areas will be listed, defaulting
to NO.
Use the up < > or down < > arrows to select each Staff Area and
press the left < > or right < > arrow to set the value to YES if it is to
be encoded on the staff keycard. When the areas are set accordingly, press
< >. The following is displayed when ready to encode specific Staff Areas
to a Staff card:
If all 16 Staff Areas are available and set to YES for a Staff keycard the
following is shown:
When all required parameters are set, press < > to encode the keycard
with access to the selected Staff Common Area(s).
Section, Floor, Group, Zone, Area, and Bellman's Master
91