Kaba ILCO FDU User Manual page 73

Purpose:
Shortcut:
Default:
Options:
62
Chapter 3
Local Standard Time
Internal Time
Daylight Savings Time
Figure 3.6.7-1: Daylight Saving Time and Standard Time coverage of Fixed Time Zone 12.
3.6.7.2 Flexible Time Zones
The RAC Models 3.5, 4 & 4XT do not use the Fixed Time Zones that can be encoded
on a Staff keycard. Instead, the RAC models have their own set of 8 Flexible Time
Zones, which are defined in the settings of the FDU and downloaded to the memory of
the RAC when it is programmed.
Guest, Staff and Passage keycards can be assigned to one of the Flexible Time Zones
that are programmed into the Model 3.5, 4 & 4XT RACs.
Each Flexible Time Zone consists of four intervals that can be individually selected.
All keycards of the appropriate type (Guest, Staff or Passage) will be valid during the
intervals in the assigned Flexible Time Zone, and are not valid (access denied) outside
of those intervals. The Passage keycard swiped outside the intervals will put the door
in Passage mode at the proper time.
Swipe a GMA keycard, press 7, 2 and 5
No restrictions, access provided 24 hours a day.
The Features Menu allows setting up of the time intervals for the 8 Flexible Time
Zones, NOT to implement them. There is no option to set each Flexible Time Zone to
YES, NO or AUTO, since the choice of which Flexible Time Zone will apply to each
Guest, Staff and Passage keycards is made when the RAC is programmed (see Section
5.5 - Remote Access Controller Models 3.5 and 4 Flexible Time Zones).
The FDU shows all defined intervals for a specific time zone. Use the direction keys
12:00
Time Zone 12
12:00
Kaba Ilco Lodging Access Control System
16:00
16:00