Kaba ILCO FDU User Manual page 109

98
Chapter 4
keycards can be inserted in the lock to cancel previously encoded
keycards of the same level.
If Duplicate keycard is selected, all of the keycards encoded will be
identical Duplicate keycards (for more information, see section 4.5 – New
Versus Duplicate Keycards). Some keycards, such as Grand Master and
Emergency keycards are always duplicates, so that they can never cancel
each other when used in locks.
6. The keycard(s) can now be encoded. The FDU will identify the type of keycard,
and request that a blank keycard be swiped.
For example, for an Adjoining Suite, the FDU screen will show:
Insert and swipe the first keycard.
If more than one keycard has been requested the FDU will prompt for additional
keycards to be swiped. Continue encoding blank keycards until the number
requested have been done.
NOTE: Keycards must be passed evenly through the encoder, with the magnetic
stripe down and to the right (away from the keypad and the screen). A wide
range of speeds is accepted, and the FDU will indicate if encoding was
successful or not.
Example: Making a Guest keycard for Guest Room 101 with a GMA authorized
user.
1. Swipe a GMA authorized level keycard. (Note that if a FDA keycard or PIN was
used to access the system the screen shown in Step 3 would be the initial
display).
Kaba Ilco Lodging Access Control System