Rear Brake; Removing The Brake - APRILIA Quasar 50 Manual

CYCLE PARTS
1
2
4 5
3
6
6
- 26 -
00
6.5

REAR BRAKE

6.5.1

REMOVING THE BRAKE

Place a support under the rear of the frame.
Disconnect the brake cables and remove the guard, see 6.3.2 (REMOVING
THE FORK).
Remove the left-hand hub cap (1).
Extract the spilt pin.
Release and remove the nut (2) and collect the washer.
Remove the complete left wheel.
From the left side, extract in order: the spacer (3), brake drum (4) and brake
blocks (5).
Unscrew and remove the two nuts (6) and collect the washers, screws and
bracket (8).
Extract the brake block plate (7).
If necessary extract the wheel axle (9) from the right-hand side.
7 8
QUASAR 50-100
Release 00/2003 - 06