Changing The Rear Light Bulb; Changing The Handlebar Cover Lights - APRILIA Quasar 50 Manual

QUASAR 50-100
5.5.3

CHANGING THE REAR LIGHT BULB

Read carefully 5.5 (BULBS).
To change the bulbs, proceed as follows:
Release and remove the two screws (1).
Remove the lens (2).
Extract the damaged bulb and replace it with a new one of the same type.
5.5.4

CHANGING THE HANDLEBAR COVER LIGHTS

The handlebar cover contains:
1) High beam warning light (blue)
2) Hazard light (red)
3) Parking/low beam warning light (green)
4) Mixer oil reserve warning light (red)
To change the bulbs, proceed as follows:
IMPORTANT
Remove the handlebar cover, see 6.1.2 (REMOVING THE
HANDLEBAR COVER).
Disconnect the two connectors for the warning light being replaced.
Unscrew the nut (5).
Remove the warning light from the handlebar cover.
Release 00/2003 - 06
ELECTRIC SYSTEM
1
2
1 2
4
5
5
3
- 9 -
00