QUASAR 50-100
Unscrew and remove the three screws (6) and collect the washers and nuts.
Disconnect the direction indicator connectors (7).
Disconnect the tail light connectors (8).
Remove the rear fairing.
6.1.6
REMOVING THE FOOTPEGS
Unscrew and remove the three screws (1) and collect the washers and nuts.
Unscrew and remove the three screws (2) and collect the washers and nuts.
Unscrew and remove the four screws (3) and collect the washers and nuts.
Remove the footpeg.
IMPORTANT
Repeat the process to remove the other footpeg if needed.
Release 00/2003 - 06
CYCLE PARTS
6
7
8
1
2
3
3
6
- 9 -
00