Bulbs; Changing The Direction Indicator Bulbs - APRILIA Quasar 50 Manual

QUASAR 50-100
5.5

BULBS

Read carefully 1.3 (GENERAL SAFETY RULES).
Risk of fire. Keep fuel and other flammable substances away from the
electrical components.
Before changing a bulb, move the main switch to position "
a few minutes, so that the bulb cools down. Change the bulb wearing
clean gloves or using a clean and dry cloth. Do not leave fingerprints on
the bulb, since these may cause its overheating and consequent
breakage. If you touch the bulb with bare hands, remove any fingerprint
with alcohol, in order to avoid any damage.
DO NOT FORCE THE ELECTRIC CABLES.
IMPORTANT
Before changing a bulb, check the fuse, see 5.5.6
(CHANGING THE FUSES).
5.5.1

CHANGING THE DIRECTION INDICATOR BULBS

Read carefully 5.5 (LAMPADINE).
Remove the protection screen (1) from the indicator mount by pushing on its
sides with a screwdriver.
Make sure not to damage the protection screen, while removing it.
Extract the damaged bulb and replace it with a new one of the same type.
IMPORTANT
When refitting, assemble the protection screen (1) carefully to
its mount.
Release 00/2003 - 06
" and wait
ELECTRIC SYSTEM
1
5
- 7 -
00