Table of Contents
Advertisement
CAUTION
PLEASE CONTACT AN Official Aprilia Dealer TO HAVE THE FRONT FORK OIL
CHANGED AND ITS OIL SEALS REPLACED.
Justering af greb til forbremse (03_06)
The distance between the end of the lever (1) and the handgrip (2) can be adjusted
by rotating the set screw (3).
The MAX and MIN clicks correspond to a lever end-handgrip distance of about 114
mm (4.49 in) and 96 mm (3.78 in) respectively.
•
Push the control lever (1) forward and turn the set screw (3) until the lever
(1) is at the desired distance.
03_06
Rear brake pedal adjustment (03_07)
The control levers have been ergonomically fitted when assembling the vehicle.
If necessary, the position of the levers can be personalised.
•
Rest the vehicle on its stand.
•
Partially undo the screw (1).
•
Turn the cam (2) until the adequate position for the pedal (3) is obtained.
•
Tighten the screw (1) and check the cam is stable in position.
CAUTION
03_07
TO ADJUST THE BRAKE LEVER CLEARANCE, CONTACT AN OFFICIAL Aprilia
DEALER. IF YOU ARE QUALIFIED EXPERTS REFER TO THE INSTRUCTIONS IN
THIS WORKSHOP BOOKLET THAT CAN ALSO BE BOUGHT AT ANY OFFICIAL
Aprilia DEALER.
57
Advertisement
Table of Contents
