ENGINE
3
4
6
7
3
- 22 -
00
3.6.7
REFITTING THE STARTING FREEWHEELING CLUTCH
1
Fit the bush (1) and the washer on the crankshaft.
Fit the starting gear (2), lubricated with transmission oil, and the roller cage
(3).
Reposition the starting gear (4), lubricated with oil, the rear washer and the
three front washers.
Secure the plate (5) with the two screws (6).
Torque wrench setting for screws (6): 9 Nm (0.9 kgm).
Reposition the starting freewheeling clutch (7).
Refit the primary pulley, see 3.6.3 (REMOVING THE PRIMARY PULLEY).
2
5
QUASAR 50-100
Release 00/2003 - 06