Implementing Stealth Mode - Christie Mirage 304K User Manual

3. Select Ignore Low AC Input Voltage Error.
4. To ignore the Low AC Input Voltage error when turning on the projector, select Enter.

Implementing Stealth mode

When Stealth mode is enabled, the status and shutter LEDs are turned off and the heartbeat feature
on the display panel Enter key is disabled.
1. Select MENU > System Settings > Power Settings > Stealth Mode.
2. To disable the LEDs and heartbeat feature, select Enter.
3. To enable the LEDs and heartbeat feature, select Stealth Mode again.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Configuring system settings
40