Introduction; Safety And Warning Guidelines - Christie Mirage 304K User Manual
Hide thumbs
Also See for Mirage 304K:
- Installation and setup manual (68 pages) ,
- Service manual (113 pages) ,
- Manual (7 pages)
Table of Contents
Advertisement
Introduction
This manual is intended for Christie qualified installers and trained operators of Christie Mirage 304K
projection systems.
For complete Mirage 304K product documentation and technical support, go to
www.christiedigital.com.
Safety and warning guidelines
Read all safety and warning guidelines before installing or operating the projector.
This projector is intended for use in a non-cinema environment.
This projector must be operated in an environment that meets the operating range specification. Use
only the attachments and/or accessories recommended by Christie. Use of others may result in the
risk of fire, shock, or personal injury.
Warning! If not avoided, the following could result in death or serious injury.
•
This product must be operated in an environment that meets the operating range as specified in
this document.
•
Do not look directly into the lens when the light source is on. The extremely high brightness can
cause permanent eye damage.
•
EXTREME BRIGHTNESS! When accessing a restricted access location for product service or
maintenance, avoid exposure to the product beam path by turning the product power off and
disconnecting the product from AC power, or by shuttering the light source to avoid emissions
from the front aperture.
•
ELECTRICAL and BURN HAZARD! Use caution when accessing internal components.
•
FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
•
Keep fingers and other body parts away from the moving parts in the product. Tie back long
hair, and remove jewelry and loose clothing before manually adjusting the product.
•
FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
•
SHOCK HAZARD! Power supply uses double pole/neutral fusing. Disconnect all power sources
before opening the product.
•
FIRE HAZARD! Do not exceed 30 A for the breaker to power Input 1 on the projector.
•
Install the product near an easily accessible AC receptacle.
•
FIRE AND SHOCK HAZARD! Use only the attachments, accessories, tools, and replacement parts
specified by Christie.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright
©
2020 Christie Digital Systems USA, Inc. All rights reserved.
8
Advertisement
Table of Contents
