Product Labels - Christie Mirage 304K User Manual

• C—No access zone. Horizontal clearance of the no access zone must be a minimum of 2.5
meters.
• D—Vertical distance to hazard zone. The hazard zone must be no lower than 3.0 meters above
the floor.
• E—Represents the top view of the projector.
• F—Represents the side view of the projector.
Projection lens
0.38:1
0.72:1 HB fixed lens
0.9:1 fixed lens
1.13-1.31:1 HB zoom lens
1.31-1.63:1 HB zoom lens
1.63-2.17:1 HB zoom lens
1.99-2.71:1 HB zoom lens
2.71-3.89:1 HB zoom lens
3.89-5.43:1 HB zoom lens
4.96-7.69:1 HB zoom lens

Product labels

Learn about the labels that may be used on the product. Labels on your product may be yellow or
black and white.
General hazards
Hazard warnings also apply to accessories once they are installed in a Christie product that is
connected to power.
Fire and Shock Hazard
To prevent fire or shock hazards, do not expose this product to rain or moisture.
Do not alter the power plug, overload the power outlet, or use it with extension cords.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Electrical Hazard
Risk of electric shock.
Do not remove the product enclosure.
Only Christie qualified technicians are authorized to service the product.
Mirage 304K (Bm.1) User Guide
020-101778-12 Rev. 1 (04-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Part number
144-136101-XX
144-110103-XX
144-111014-XX
144-103105-XX
144-104106-XX
144-105107-XX
144-106108-XX
144-107109-XX
144-108100-XX
144-109101-XX
Hazard distance
(m)
0.6
0.6
0.7
1.1
1.3
1.7
2.2
3.1
4.2
6.0
Introduction
10