Table of Contents
Advertisement
Maintenance and Tips
Troubleshooting
Problem: Unit is unstable or racks while in use.
Solution: Make sure unit is on a solid, level surface. Adjust the rear
adjustment feet until all 4 feet are sitting solid on the floor. Once level, turn
the center foot down till it touches the floor.
Problem: No power at console when pedaling.
Solution: Make sure all connections made during assembly are good. Pedal at
an RPM of at least 60 for 30 seconds. If no power, contact LifeSpan customer
service.
Problem: Rough feeling in pedals when in use.
Solution: If everything is tight, contact LifeSpan Customer Service for
replacement pedals.
Problem: Excess play in the handlebars or frame components.
Solution: Go over the C7000i to make sure all assembly hardware is tight.
Cleaning
Keep the unit clean and dry. It is a good idea to wipe the unit down after each
workout to keep it clean. Clean only with mild soap and a slightly damp cloth.
Never use solvents when cleaning.
Moving
Your C7000i bike comes with two
transport wheels (R) located on the
rear support. Carefully tilt the front of
the bike up until the transport wheels
in the back make contact with the
floor and roll the bike to the desired
location. It may be difficult to roll the
bike in plush carpeting.
R
35
Advertisement
Table of Contents
