Table of Contents
Advertisement
Step 4: Front Support Assembly
A. Adjust the Seat Post so it is at the highest setting.
B.
Tilt the bike back until it is resting on the seat and the rear support assembly
(as shown below.)
C. Align the Front Support Assembly(2) with the Front Main Frame Bracket(B).
D. Install two M8 Bolts(15) and Washers(16) through the top holes of the Front
Main Frame Bracket(B) and into the Front Support Assembly(2).
Do not tighten bolts yet.
E.
Install two M8 Bolts(15) and Washers(16) through the middle holes of the
Front Main Frame Bracket(B) and into the Front Support Assembly(2).
Do not tighten bolts yet.
F.
Install two M8 Bolts(15) and Washers(16) through the bottom holes of the
Front Main Frame Bracket(B) and into the Front Support Assembly(2). Do not
tighten bolts yet.
G. Securely tighten the two M8 Middle Bolts(15) first,then securely tighten the
two M8 Top Bolts and two M8 Bottom Bolts.
2
2
16
15
15
B
B
16
16
16
15
15
16
16
15
15
Assembly
11
Advertisement
Table of Contents
