Maintenance And Tips; Engineering Mode - LifeSpan C7000i Owner's Manual

Maintenance and Tips

Engineering Mode

To Enter Engineering Mode, Press and hold the Pause Button and the Up button
for 3 seconds. The console will beep and display Engineering Mode.
Function
Press Enter. The display will show Roller. This is something
that does not need adjustment.
Press Enter. The display will show Select the units.
Press the ▲ or ▼ buttons to change between Si
(metric) or EN English modes.
Press Enter. The display will show Power Saving: On or Off.
Use the ▲ or ▼ buttons to change between On or Off
Press Enter. The display will show Total Distance. It will
show 1 digit on the left and 3 digits on the right for a total
of 4 digits. This is the total number or miles or
Kilometers accumulated.
Press Enter. The display will show Total Hours. It will show
1 digit on the left and 3 digits on the right for a total of 4
digits. This is the total number of hours the bike has been
used.
Press Enter
34
Display
Engineering Mode
2012/05/21
Roller
183
Select the units
SI or EN
Power Saving On/Off
Total Distance
0
Total Hours
0
Console goes back to normal
operating mode
v1.0
000
000