Table of Contents
Advertisement
Assembly
Step 9: Storage Tray Assembly
A. Align the
Storage Tray(9)
B. Install two
#8 screws(22)
and securely tighten.
Mast(6)
Step 10: Setting Date and Time
To set the date and time of day in your console follow these steps:
1.
Press any of the program group buttons for 3 seconds to initiate the date and
time set up mode. The screen will change to update Calender.
Press ENTER
2.
Press the ▲ /▼ buttons to set the correct YEAR. Press Enter.
3.
Press the ▲ /▼ buttons to select the correct MONTH. Press Enter
4.
Press the ▲ /▼ buttons to select the correct DAY. Press ENTER
5.
Press the ▲ /▼ buttons to set the HOUR. Press Enter
6.
Press the ▲ /▼ buttons to set the MINUTES. Press ENTER
16
with the holes in the
through the
6
Console Mast(6)
and into the
Storage Tray(9)
9
22
.
Console
Advertisement
Table of Contents
