Maintenance And Tips; Engineering Mode - LifeSpan C5i Owner's Manual

Engineering Mode

To Enter Engineering Mode, Press and hold the Enter Button and the Up
button for 3 seconds. The console will beep and display Engineering Mode.
Function
Press Enter. The display will show Roller. This is something
that does not need adjustment.
Press Enter. The display will show Select the units.
Press the ▲ or ▼ buttons to change between Si
(metric) or EN English modes.
Press Enter. The display will show Set calendar On or Off.
Use the ▲ or ▼ buttons to change between On or Off
Press Enter. The display will show Total Distance. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number or miles or
Kilometers accumulated.
Press Enter. The display will show Total Hours. It will
show 1 digit on the left and 3 digits on the right for a
total of 4 digits. This is the total number of hours the
bike has been used.
Press Enter

Maintenance and Tips

Display
Roller
183
Select the units
SI or EN
Set Calendar On/Off
Total Distance
0
Total Hours
0
Console goes back to normal
operating mode
000
000
41