GE DMS Go Operator's Manual page 120

Chapter 4. Measuring and Recording Data
4.2.1 Setting the Display Range (MEASURE - DISPLAY RANGE) (cont.)
3. Press F3 or F4 to change the display delay in increments of 5 or 10 in (50 or 75 mm), or move the joystick (
setting in increments of 0.001 in. (0.01 mm). Values from 0.040 to 1100 in. are allowed.
4. After completing your selection, move the joystick up or down (
return to the Main Menu.
92
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
) to navigate away from this function, or press HOME to
) to change the range
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com