GE DMS Go Operator's Manual page 124

Chapter 4. Measuring and Recording Data
4.2.4a Setting the max gain (MEASURE - max gain)
Note: This function is only available if the MAX GAIN MODE function has been set to MANUAL.
When adjusting the max gain, each press of the joystick increases or decreases the gain level. To enter a user-specified gain step, complete
the following steps:
In the MEASURE menu, activate the max gain submenu using the joystick (
1.
2. Press the F3 or F4 keys to change the max gain in increments or move the joystick (
decrements of 0.1 dB.
3. After making your choice, move the joystick up or down (
the Main Menu.
96
Your Complete Source for
Testing Equipment. Since 1969!
) to navigate away from this function, or press HOME to return to
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to change the max gain in increments or
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com