Chapter 1. General Information
The DMS Go is a portable ultrasonic thickness gauge. In addition to its light-weight design, the DMS Go includes a clean and simple user
interface and a large, easy-to-read color WVGA (800x480) display. The instrument provides ultrasonic flaw detection and thickness
measurements., and can store scans, operating parameters, and reports. Before beginning to take measurements, however, the instrument
display, operating parameters, and data files must be configured by using the Configure, Probe & Cal, and DR menus. The following
specific topics are discussed in this chapter:
•
Supplying power to the instrument
•
Powering the instrument ON and OFF
•
Using the keypad
•
Using the display
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 1. General Information
1
1-847-577-3980
Info@BergEng.com