GE DMS Go Operator's Manual page 139

6.3 Using Existing Data Recorder Files (DR - PROPERTIES) (cont.)
Four parameters are available: Record, Stats, Header, Edit and Comment.
2.
Record lists the data by location, value, attachment type, send function, advance time, 1st Advance by and Dir, and Auto Reverse.
•
(With the joystick, you can change the location, send function, advance time and direction.)
Stats lists data as readings, empty points, obstructed points; min readings, # min points, T-Min points; max readings, # max points,
•
T-Max points; A-Scan, B-Scan and M-Grid points; range, mean and standard deviation. (This data is not editable.)
Header covers other information: file type, modification date, starting and ending row, starting and ending column, starting and
•
ending point, description (four lines), serial number, probe, calibration, temperature, inspector, company, unit, velocity, T-min and
T-max, absolute and # loss, absolute and % growth, and memo. (You can edit the description, temperature, inspector, company, and
memo data. Use the joystick to enter the option. Then, in the alphanumeric window, select each character, and press F2 (ENTER) to
confirm your selection. Press F3 (BKSP) to delete characters, or F4 (CONFIRM) to confirm the complete entry.)
Edit allows you to insert, append or delete file locations. Use the F1, 2, or 3 keys to insert, append or delete locations, and the F4 key
•
to confirm your selection.
Comment allows you to enter or edit comments A through P for each individual file in the File Comment list. (See page 121.)
•
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 6. Working with Recorded Data
1-847-577-3980
Info@BergEng.com
111