GE DMS Go Operator's Manual page 49

2.3.1b Setting the Units of Measurement (CONFIG-UNIT)
In the MAIN menu, scroll to the CONFIG submenu using the joystick (
1.
2. Use the joystick (
mm - default setting which displays values in millimeters
•
in - displays values in inches
•
3. To change the units of measurement, move the joystick left or right (
4. After making your choice, use the joystick (
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the UNIT function. The following options are available:
) to move to another function, or press HOME to return to the Main Menu.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
). Several functions are displayed on the screen.
).
Chapter 2. Instrument Setup
27
1-847-577-3980
Info@BergEng.com