Multi-Key Functions - GE DMS Go Operator's Manual

Chapter 1. General Information

1.3.2 Multi-Key Functions

Three functions require a combination of keys:
•
Software Update = Power ON + F4 + F2
•
Factory Setup = Power ON + F4 + F1
•
JPG Capture = F1 + F2
Note: All multi-key functions are defined with the instrument in the left-hand orientation (see the left side of Figure 3 on page 6).
•
Power button + F4 + F2
Pressing and holding these three buttons simultaneously causes the instrument to initiate a software update.
Note: A formatted SD card with a valid DMS Go update file in the root directory must be inserted prior to pressing these buttons. Be aware
that the root directory can have only one file with an .sdu extension.
•
Power button + F4 + F1
Pressing and holding these three buttons simultaneously causes the instrument to ignore the last known setup and revert to the factory
default settings.
Important:
The last known setup will be overwritten and lost during this process.
10
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com