GE DMS Go Operator's Manual page 91

2.5.4 Adjusting the Calibration Results (PROBE & CAL - TEMP COMP) (cont.)
Note: These functions have both coarse and fine adjustment. Press F3 or F4 to enter coarse adjustment (the lower case function tag turns
to capital letters) to adjust the values in increments of 100 (for velocity) or 10 (for temperature). Adjustments in increments of 1 are
made with the joystick.
The DMS Go can display both the uncompensated and compensated thickness values simultaneously. Display THK (the
uncompensated thickness value) on the Results area of the display. (see Displaying Measured Results (MEASURE- RESULTS).
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 2. Instrument Setup
69
1-847-577-3980
Info@BergEng.com