GE DMS Go Operator's Manual page 100

Chapter 3. Creating Data Recorder Files
Reading Type
Location Label Length Sets the maximum length of the label identifying each location.
Grid Labeling
Starting Row
Ending Row
Starting Column
Custom Grid
Ending Column
File
File Name
Units
T-MIN
T-MAX
72
Your Complete Source for
Testing Equipment. Since 1969!
Table 3: Items to be Defined for Each File Type (cont.)
Set file style to Standard (normally recommended) or Extended.
Specify if rows and columns will have alphabetical or numerical tags.
Defines the number or letter assigned to the first row in the data file.
Defines the number or letter assigned to the last row in the data file.
Defines the number or letter assigned to the first column in the data file.
Defines the number or letter assigned to the last column in the data file.
16 character file name, set using the virtual keyboard. No two files in the DMS Go memory
may have the same file name.
Selects either inches or millimeters as the unit of measurement
Defines the minimum thickness limit. Measurements below this limit cause an alarm to signal.
Defines the maximum thickness limit. Measurements above this limit cause an alarm to signal.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com