GE DMS Go Operator's Manual page 99

Reading Type
Grid Labeling
Starting Row
Ending Row
Starting Column
Ending Column
Start Point
Grid File
End Point
File Name
Units
T-MIN
T-MAX
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
Table 3: Items to be Defined for Each File Type (cont.)
Set file style to Standard (normally recommended) or Extended.
Specify if rows and columns will have alphabetical or numerical tags.
Defines the number or letter assigned to the first row in the data file.
Defines the number or letter assigned to the last row in the data file.
Defines the number or letter assigned to the first column in the data file.
Defines the number or letter assigned to the last column in the data file.
Defines the number assigned to the point in each data file location; a location is one cell grid
Defines the number assigned to the last point in each data file location.
16 character file name, set using the virtual keyboard. No two files in the DMS Go memory
may have the same file name.
Selects either inches or millimeters as the unit of measurement
Defines the minimum thickness limit. Measurements below this limit cause an alarm to signal.
Defines the maximum thickness limit. Measurements above this limit cause an alarm to signal.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
Chapter 3. Creating Data Recorder Files
1-847-577-3980
Info@BergEng.com
71