Creating A Data File (Dr - Explorer - New) - GE DMS Go Operator's Manual

Chapter 3. Creating Data Recorder Files
3.1

Creating a Data File (DR - EXPLORER - NEW)

Before you can store any measurements, you must set up a data file. Once the file is created, you can take measurements and enter them into
the file for later interpretation (see Chapter 6).
1. Use the joystick (
Move the joystick right (
2. The first selection is the File Type (Figure 22 below).
66
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled EXPLORER in the DR menu. Press F4 (NEW) to create a file in the DR submenu.
) to open the function. The file will be stored in the directory currently selected in the Explorer window.
Figure 22: Data File Type Selection
www.BergEng.com
Berg Engineering & Sales Company, Inc.
DMS Go Operator's Manual
1-847-577-3980
Info@BergEng.com