GE DMS Go Operator's Manual page 127

4.2.5b Setting Up Alarm Parameters (ALARMS - MIN ALARM, MAX ALARM)
Note: These functions only appear if the MIN or MAX functions have been switched ON.
In the MAIN menu, activate the ALARM submenu using the joystick (
1.
2. Use the joystick (
3. Move the joystick up or down (
4. After making your choice, move the joystick up or down (
Main Menu.
Once you have set the alarm, if the value goes below the minimum value or above the maximum value, the displayed value on the screen
flashes red, and the Alarm icon
DMS Go Operator's Manual
Your Complete Source for
Testing Equipment. Since 1969!
) to select the function titled MIN ALARM or MAX ALARM.
) to enter the alarm value in increments of 0.001.
flashes in the icon bar at the upper left.
www.BergEng.com
Berg Engineering & Sales Company, Inc.
).
) to navigate away from this function, or press HOME to return to the
Chapter 4. Measuring and Recording Data
1-847-577-3980
Info@BergEng.com
99