Table of Contents
Advertisement
Device Menu (Both Units)
The device menu is accessed by clicking the
tab above the menu bar.
•
Disconnect
from the unit while leaving the program active.
•
Settings
(see figure 19), which provides general information about the
connected unit.
Figure 19.
The
Model Name
clicking the
The
Apply
device name:
Figure 20.
•
Reset Device
connected transmitter or receiver. Reset returns all settings to their default values.
Figure 21.
•
Update Firmware
and opens the Firmware Loader utility in the background (see
on the next page).
•
About This Module
— Disconnects the Product Configuration Software
— Opens the
Unit Information
Unit Information Dialog Box
can be changed to a custom value or reset to the default value by
tab, opening the
Device Name
button becomes selectable when you have entered a name in the
field.
Device Name Dialog Box
... — Opens a dialog box (see figure 21) that allows you to reset the
Reset Device Dialog Box
... — Disconnects the Product Configuration Software from the unit
... — Shows the version of the unit-specific part of the software.
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
icon on the device
dialog box
dialog box (see figure 20).
Device Name
Updating the
Enter a
Firmware,
35
Advertisement
Table of Contents
