Extron electronics FOX II T DP 4K User Manual page 38

EDID Minder window (connected to transmitter only)
The
EDID Minder
provided to the transmitter. Select this window from either the
Configuration
NOTE: The transmitter front panel EDID Select rotary switch must be in the 1 position
for most of the EDID Minder window to be available for operation. When the switch is
in other positions, only the Input field (
4 4
3 3
2 2
1 1
Figure 16.
Click an EDID box in the
Favorites
If desired, drag and drop an EDID box into the
If desired, reduce the number of EDID boxes displayed by selecting a filter in one of four
categories (panes) (
The
EDIDs that you use.
The
format of the DisplayPort input.
window (see figure 16) provides controls for you to tailor the EDID that is
window by clicking
EDID Minder Screen (Transmitter Connection Only)
Available EDID
( 3 ) panes to select (highlight in yellow) the EDID identified by that box.
4
):
Resolution
tab ( 5 ) allows you to create a list view of the connected output
Common Timings
6
pane ( ) displays the resolution, rate, video type, and embedded audio
Input
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
Status
on the menu bar.
EDID Minder
6 ) and the following is displayed:
6 6
5 5
( 1 ),
Connected Outputs
pane.
Favorites
, ,
Refresh Rate Video Format
or
Input/Output
( 2 ), or
, and .
Audio Format
30