Extron electronics FOX II T DP 4K User Manual page 13

Audio embedding — Converts analog stereo audio signals to digital DP audio when
•
the analog input is selected.
Two analog audio inputs — The transmitter accepts an unbalanced stereo or mono
•
audio input on a 3.5 mm mini jack and a balanced or unbalanced stereo or mono audio
on a 5-pole captive screw connector.
Automatic audio detection and switching — The transmitter can automatically
•
detect digital audio embedded in the DisplayPort input and select it for transmission. If
the transmitter does not detect embedded audio, it switches to the analog audio input.
Or, you can manually select either audio input with an SIS command.
• Analog audio input gain and attenuation — The level of the analog audio input can
be adjusted within a range of -18 dB (attenuation) to +24 dB (gain) via the RS-232 serial
port or USB port.
• Audio output — The receiver outputs either balanced or unbalanced stereo audio on a
5-pole captive screw connector and unbalanced audio on a 3.5 mm mini jack, or digital
audio embedded in the DisplayPort output.
• DisplayPort audio de-embedding with analog stereo outputs
Audio muting capability
•
• Audio return channel — The transmitter and receiver pair supports analog audio
return from the receiver to the transmitter, such as for return of a microphone input back
to the transmitter.
• Bidirectional RS-232 and IR signals over fiber optic cabling for AV device
control
• LED indicators for signal presence, HDCP, and power — Provides a visual
indication of system status for real-time feedback and monitoring of key performance
parameters.
• Loss-of-light alarms — The transmitters and receivers have discrete outputs that
indicate if either of the fiber optic links have suffered a loss of the light signal.
• Alarm notification for fiber link loss — The units can be set up to trigger an external
control system for immediate notification when a fiber link has been lost. Requires a
second fiber link for the transmitter.
• Product Configuration Software — For remote control from a PC, the Extron
Product Configuration Software, which runs under Microsoft® Windows®, provides a
graphical interface and drag-and-drop/point-and-click operation.
• Simple Instruction Set — The transmitter and receiver use the SIS for easy remote
control operation.
• Upgradable firmware — The firmware that controls the operation of each unit can
be upgraded in the field via the USB Configuration port without taking the unit out of
service. Firmware upgrades are available for download on the Extron website and they
can be installed using the Product Configuration Software.
Rack mounting — Both FOX II units are rack mountable in any conventional 19-inch
•
wide rack, using an Extron 9.5-inch deep rack shelf.
• Power — The 100 VAC to 240 VAC, 50-60 Hz internal power supplies provide
worldwide power compatibility and low power consumption.
FOX II T/R DP 4K Transmitter and Receiver • Introduction 5