Extron electronics FOX II T DP 4K User Manual page 41

Receiver Input/Output Configuration window
1 1
2 2
3 3
4 4 5 5
Figure 18. Input/Output Configuration Screen for the Receiver
radio buttons — Select the
1 HDCP Mode
to follow the input video HDCP encryption status on the DisplayPort connector.
Select to always encrypt the output video regardless if the input video is
On
encrypted or not.
2
HDCP Notification
radio button to select how the receiver displays HDCP notification on a
monitor connected to its DisplayPort Output port.
radio buttons — Select the
3
Color Bit Depth
transmitter to automatically follow the input bit depth. Select
to constrain the bit depth.
button — Click this button to toggle the video mute on and off
4 Video Mute
for the receiver DisplayPort output port. Video mute sends black video while
maintaining sync timings from the input video signal. Embedded audio continues to be
output.
button — Click this button to toggle the video mute on and off
5 Sync Mute
for the receiver DisplayPort output port. Sync mute disables the sync output,
allowing the display to go blank and, eventually (depending on the timeout parameters
set in the connected display) go into standby or sleep mode. Embedded audio is also
muted.
NOTE:
Video Mute
6 6
7 7
radio button for the receiver
Auto
radio buttons — Select either the
cancels and
Sync Mute Sync Mute
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
8 8
or
Green Black
radio button for the
Auto
Force 8-bit
cancels
Video Mute
.
33