Extron electronics FOX II T DP 4K User Manual page 39

Input/Output Configuration window
The
Input/Output Configuration
features of the transmitter (see figure 17) and receiver (see
this window from either the
on the menu bar.
Config
Transmitter Input/Output Configuration window
1 1
2 2
3 3
4 4
5 5
7 7
Figure 17. Input/Output Configuration Screen for the Transmitter
checkbox — Select for the transmitter to act as an
1 HDCP Authorized
HDCP-authorized device. Clear if you do not desire the transmitter to act
as an HDCP-authorized device. An HDCP authorized device allows an HDMI source to
output HDCP-encrypted video.
A non-authorized setting is useful for video sources that always encrypt their output if
the connected device (the transmitter in this example) is HDCP capable. If the display
connected to the receiver is not HDCP compliant, this automatic encryption would
result in no display.
radio buttons — Select the
2 HDCP Mode
to follow the input video HDCP encryption status on the Loop-through
connector. Select to always encrypt the loop-thru output video regardless if
On
the input video is encrypted or not.
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
window allows you to set the input and output option
or window by clicking
Status EDID Minder
6 6
radio button for the transmitter
Auto
figure 18, on page 33). Select
Input/Output
8 8
¢ ¢
9 9
31