Extron electronics FOX II T DP 4K User Manual page 42

6 Return Audio Input Gain
previous page) — Click and slide the
control to vary to select the input audio gain or attenuation value of the
audio returned to the transmitter, from -18 dB to +24 dB in 1 dB
increments.
NOTE: As an alternative, you can also either:
•
Click the up arrow ( ) and down arrow ( ) buttons to step the
level up and down.
• Click and highlight the value displayed in the
and type in the desired numeric level.
buttons — Click the
7
Mute
functions on and off:
— Mute the signal on the DisplayPort Output port.
DisplayPort Mute
— Mute the signals on both analog audio output ports.
Analog Mute
— Mute the signals on the DisplayPort Output port and both analog audio
Mute All
output ports.
panel — Shows the EDID information of the connected
8 EDID
display. Click the
Capture EDID from Display
EDID in the Extron library on the connected computer.
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
slide control (see figure 18 on the
Return Audio Input Gain
dB
buttons to toggle the following mute
Mute
button to store the
slide
field ( )
34