Extron electronics FOX II T DP 4K User Manual page 40

radio buttons
3 HDCP Notification
Select either the
Green
displays HDCP notification on a monitor connected to its Loop-through
output port.
The HDCP notification function in the transmitter enables a connected display to show a
green or black screen if the transmitted video is HDCP encrypted, and the display is not
HDCP capable.
radio buttons
4
Color Bit Depth
transmitter to automatically follow the input bit depth. Select
to constrain the bit depth.
button — Click this button to toggle the video mute on and off
5
Video Mute
for the transmitter Loop-through output port. Video mute sends black video
while maintaining sync timings from the input video signal. Embedded audio continues
to be output.
button
— Click this button to toggle the video mute on and off
6 Sync Mute
for the transmitter Loop-through output port. Sync mute disables the sync
output, allowing the display to go blank and, eventually (depending on the timeout
parameters set in the connected display) go into standby or sleep mode. Embedded
audio is also muted.
NOTE:
Video Mute
drop-down list
7 Video Test Pattern
drop-down list to select among 720p and 1080p color
Pattern
bars for the transmitter to send to the receiver on the fiber cable.
Or select to transmit the digital video that is input on the
Off
DisplayPort input port.
radio buttons
8 Audio Format
radio button — Transmit the embedded
Auto Detect
digital audio if detected, otherwise transmit analog
audio.
radio button — Transmit the embedded digital audio.
DisplayPort
radio button — Transmit the analog audio.
Analog
slide control
9 Analog Input Gain
slide control control to vary to select the input audio gain or
Gain
attenuation value on the analog input only, from -18 dB to +10 dB in 1 dB
increments.
NOTE: As an alternative, you can also either:
• Click the up arrow ( ) and down arrow ( ) buttons to step the
level up and down.
• Click and highlight the value displayed in the
and type in the desired numeric level.
¢
Loop-through Output
toggle the following mute functions on and off:
— Mute the signal on the Loop-through DisplayPort
DisplayPort Mute
Output port.
— Mute the signals on both Loop-through analog audio output ports.
Analog Mute
— Mute the signals on the Loop-through DisplayPort Output port and both
Mute All
analog audio output ports.
FOX II T/R DP 4K Transmitter and Receiver • Remote Control
(see figure 17 on the previous page) —
or radio button to select how the transmitter
Black
— Select the
Auto
cancels and
Sync Mute Sync Mute
— Click the
— Click and slide the
Mute buttons — Click the
radio button for the
Force 8-bit
cancels
Video Mute
Video Test
Analog Input
field ( )
dB
buttons to
Mute
.
32