Description; Intended Use - Honeywell HON R100NG Series User And Maintenance Manual

2 Description
Contents
2.1 Intended use
Intended use
Limitations of use
User manual for HON R100 gas pressure regulator with HON P095NG pilot
Topic
Intended use
Device models
Labels/Markings
Identifying the device
Layout and operation
Technical specifications
HON R100NG gas pressure regulators featuring an HON P095NG pilot can be used to main‐
tain the outlet pressure of a gas constant within a regulating line regardless of the influence
of disturbance variables such as inlet pressure changes and/or discharge changes. In addition,
these gas pressure regulators can be used to implement an active‐monitor regulator configu‐
ration. It can be used in transfer stations of gas transportation networks, in power plants and
industrial plants. HON R100NG gas pressure regulators featuring an HON P095NG pilot are
suitable for use with natural gas or dry, non‐aggressive industrial gases.
Note: The utilization limits of the device with regard to the medium, operating pressure and
operating temperature can be gathered from the type plate attached on the device or the
technical specifications.
The use under different operating conditions must be coordinated in consultation with the
manufacturer.
Please observe the following limitations of use:
 Do not use the device for any media other than those mentioned in the intended use or
those discussed with and approved by the manufacturer.
 Do not use the device in any installation position other than the one documented in
this user manual.
 Do not use the device against the direction of flow specified on the device and in the
user manual.
 When replacing defective parts, only use original spare parts or manufacturer‐approved
standard parts.
 Do not attempt to modify or remodel the device on your own.
Description
Page
7
7
8
10
12
17
7